Available Product Variants
Article | ETA-approval | Anchor length | Internal thread | Min. bolt penetration | Our Price | |
EA II M6 electro zinc plated Art-Nr. 48264 | yes | 30 [mm] | M-6 | 6 mm] | 1340.48 | Buy Product |
EA II M8X30 electro zinc plated Art-Nr. 48284 | yes | 30 [mm] | M-8 | 8 [mm] | 1529.28 | Buy Product |
EA II M8X40 electro zinc plated Art-Nr. 48323 | yes | 40 [mm] | M-8 | 8 [mm] | 920.40 | Buy Product |
EA II M10X30 electro zinc plated Art-Nr. 48332 | yes | 30 [mm] | M-10 | 10 [mm] | 1062.00 | Buy Product |
EA II M10 electro zinc plated Art-Nr. 48339 | yes | 40 [mm] | M-10 | 10 [mm] | 1132.80 | Buy Product |
EA II M12 electro zinc plated Art-Nr. 48406 | yes | 50 [mm] | M-12 | 12 [mm] | 1085.60 | Buy Product |
EA II M8x25 Art-Nr. 532231 | yes | 25 [mm] | M-8 | 8 [mm] | 2265.60 | Buy Product |
EA II M10x25 Art-Nr. 532232 | yes | 25 [mm] | M-10 | 10 [mm] | 1038.40 | Buy Product |
EA II M12x25 Art-Nr. 532233 | yes | 25 [mm] | M-12 | 12 [mm] | 1274.40 | Buy Product |
Advantages
- The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
- The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
- The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
- The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
- Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded.
- The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.
Application and Permission
Applications | Building Materials | Permissions |
| Approved for:
* You can find detailed information on building materials in the registration document. |
|
Functionality
- The EA II is suitable for pre-positioned installation.
- Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
- The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
- The setting tools must sit on the rim of the anchor to ensure correct expansion.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.