Available Product Variants
Article | Our Price | |||||
FBS 10x110/25 SK A4 Art-Nr. 534067 | 11176.96 | Buy Product | ||||
FBS II 8x80 30/15 US TX Art-Nr. 536853 | yes | 8 [mm] | 10x80 [mm] | 65/65 [mm] | 5900.00 | Buy Product |
FBS II 10x70 15/5/- US Art-Nr. 536859 | yes | 10 [mm] | 12x70 [mm] | - | 7316.00 | Buy Product |
FBS II 10X90 35/25/5 US Art-Nr. 536861 | yes | 10 [mm] | 12x90 [mm] | 85/5 [mm] | 8260.00 | Buy Product |
FBS II 10X100 45/35/15 US Art-Nr. 536862 | yes | 10 [mm] | 12x100 [mm] | 85/15 [mm] | 8496.00 | Buy Product |
FBS II 10X120 45/35/15 US Art-Nr. 536863 | yes | 10 [mm] | 12x120 [mm] | 85/35 [mm] | 9204.00 | Buy Product |
FBS II 12X110 50/35/10 US Art-Nr. 536871 | yes | 12 [mm] | 14x110 [mm] | 100/10 [mm] | 5852.80 | Buy Product |
FBS II 14X125 60/40/10 US Art-Nr. 536877 | yes | 14 [mm] | 16x125 [mm] | 85/5 [mm] | 4389.60 | Buy Product |
FBS II 10x100 45/35/15 SK countersunk head Art-Nr. 536887 | yes | 10 [mm] | 12x120 [mm] | 85/15 [mm] | 8260.00 | Buy Product |
FBS II 10x120 65/55/35 SK ountersunk head Art-Nr. 536888 | yes | 10 [mm] | 12x120 [mm] | 85/35 [mm] | 8968.00 | Buy Product |
Advantages
- With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.
- The special saw tooth geometry enables fast cutting into the concrete.
- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
- Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
- The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
- The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
Application and Permission
Applications | Building Materials | Permissions |
| Approved for:
* You can find detailed information on building materials in the registration document. |
|
Functionality
- The ULTRACUT FBS II is recommended for the push-through installation.
- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
- We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive.
- The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control).
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.