Bolt anchor FWA

The cost-effective fixation without approval - for use in non-cracked concrete

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Available Product Variants

ArticleDrill diameterMin. drill hole depth for through fixingsAnchor lengthWidth across nutOur Price
FWA 6x40
Art-Nr. 45536
6 [mm]40 [mm]40 [mm]10 [mm]1699.20Buy Product
FWA 6X70
Art-Nr. 45598
6 [mm]70 [mm]70 [mm]10 [mm]2076.80Buy Product
FWA 10X65
Art-Nr. 45645
10 [mm]65 [mm]65 [mm]17 [mm]2029.60Buy Product
FWA 12X80
Art-Nr. 45647
12 [mm]80 [mm]80 [mm]19 [mm]1557.60Buy Product
FWA 12X100
Art-Nr. 45648
12 [mm]100 [mm]100 [mm]19 [mm]1604.80Buy Product
FWA 16X105
Art-Nr. 45649
16 [mm]105 [mm]105 [mm]24 [mm]2605.44Buy Product
FWA 8X65
Art-Nr. 45788
8 [mm]65 [mm]65 [mm]13 [mm]1416.00Buy Product
FWA 8X80
Art-Nr. 45789
8 [mm]80 [mm]80 [mm]13 [mm]1557.60Buy Product
FWA 8X95
Art-Nr. 45790
8 [mm]95 [mm]95 [mm]13 [mm]1788.88Buy Product
FWA 10X80
Art-Nr. 45792
10 [mm]80 [mm]80 [mm]17 [mm]2171.20Buy Product
FWA 10X95
Art-Nr. 45793
10 [mm]95 [mm]95 [mm]17 [mm]2360.00Buy Product
FWA 10X115
Art-Nr. 45794
10 [mm]115 [mm]115 [mm]17 [mm]1368.80Buy Product
FWA 12X120
Art-Nr. 45795
12 [mm]120 [mm]120 [mm]19 [mm]1864.40Buy Product
FWA 12X150
Art-Nr. 45796
12 [mm]150 [mm]150 [mm]19 [mm]2336.40Buy Product
FWA 16X140
Art-Nr. 45798
16 [mm]140 [mm]140 [mm]24 [mm]1519.84Buy Product
FWA 16X180
Art-Nr. 45799
16 [mm]180 [mm]180 [mm]24 [mm]1982.40Buy Product
FWA 20X160
Art-Nr. 45800
20 [mm]160 [mm]160 [mm]30 [mm]3209.60Buy Product

  

Advantages

  • The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • Available with metric and imperial threads

  

Application and Permission

ApplicationsBuilding Materials
  • Steel constructions
  • Guard rails
  • Consoles
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Gates
  • Façades
  • Concrete C20/25, non-cracked

* You can find detailed information on building materials in the registration document.

  

Functionality

  • The FWA is suitable for pre-positioned and push-through installation.
  • Prior to installation, place the hex nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hex nut).
  • When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.